Can I use a steam mop on laminate flooring? If you’ve recently acquired a steam mop or moved to a new house with laminate floors, you may be wondering.
Laminate flooring, in general, cannot withstand excessive Itness in the same manner as tiles can since the planks warp if not properly cared for.
Yes, you may steam mop your laminate flooring, but only with extreme caution.
It is frequently questioned whether or not steam mops are safe to use on laminate floors. However, as long as you do it right, it is completely safe.
Cleaning various types of flooring necessitates the use of various methods, tools, and products. Laminate is known to be moisture sensitive, needing the planks to bend and expand.
Steam mops utilize a lot of water and heat during cleaning, therefore they should be handled with caution. You may properly clean and disinfect your laminate flooring by employing the proper approach.
Follow the natural grain of the floor, according to experts. Going against it might allow moisture to enter microscopic gaps and crevices and cause damage. If your steam mop isn’t designed for laminate, use a low setting to minimize overheating.
Check the floor after a few strokes to ensure there is no water on it. If you see standing water, wipe it away with a clean cloth or towel.
It is also critical that you do not make steam cleaning a regular component of your cleaning routine. The hot steam might cause the seal on your laminate floor to deteriorate. Some floor manufacturers may even cancel warranties if steam is used to clean them.
This post may contain affiliate links. Full disclosure here.
What Is a Steam Mop?
A steam mop is a one-of-a-kind cleaning tool that uses hot steam to blast and dissolve dirt, filth, and, most importantly, germs. A basic steam mop is made up of a handle and a trigger. There’s also a long stick and a floorhead with a microfibre pad.
Some steam mops will circulate steam across the whole pad to provide thorough floor covering. Others are more focused on a single location. The most appealing aspect of these cleaners is that they sterilize without the use of any chemicals.
Simply fill the reservoir with tap or distilled water, plug it in, and wait for it to heat up. Most steamers will take 30 to 60 seconds to heat up completely. Press the trigger to emit steam while cleaning. The microfiber pad will then remove debris and excess moisture from your floors, leaving them virtually dry.
For hard surfaces like tile, the drying time for steam mopping is ly approximately 30 seconds (as opposed to carpet).
Mopping, as well as at pad stepping, can leave moisture on laminate for several minutes.
Even on the lowest setting, the high warmth of the steam is sufficient to disinfect your floors.
Important Laminate Flooring Precautions
Keep in mind that if you don’t take a few measures, you might end up damaging your laminate flooring when cleaning.
You can harm your laminate if you use too high a heat setting or keep the steam on any one place for too long.
As a result, keep the following in mind at all times:
Sweep or vacuum the floor before needing a steam mop. The mops aren’t designed to take up a lot of dirt. You also don’t want to rub dirt into the laminate by stepping the steamer back and forth. Steam mops are excellent for final polishing and cleaning up even the tiniest particles. When stepping or vacuuming, always move the furniture. Dust can collect under furniture, and vents from your furnace or air conditioner can blast the dirt throughout the room, quickly contaminating your freshly cleaned floor.
Before and during cleaning, inspect the microfiber cloth on your mop. If your floor is especially filthy, you may need to change the cloth halfway through the cleaning process.
When working with laminate, it is critical to always utilize the loIst setting on your steam mop. Excessive heat will easily destroy and distort the laminate. As a result, keep the mop on low and move it in short strokes to avoid overheating any spots on your laminate.
You should also move rapidly to hit your floor with less steam than you would with carpet or tile. Oversaturation of laminate floors might result in the dreaded warping. If you detect any deformations after needing your steam mop, it is possible that your flooring has already been compromised, therefore revert to your prior cleaning method.
On laminate, never use multi-surface cleaners. These cleaners have the potential to dull laminate flooring.
Begin in a remote corner with even strokes to avoid missing any regions. To avoid stepping on the It floors, work your way out of the room in rapid strokes. Never leave your steam mop in one location on laminate. Turn off your mop if you need to take a break.
Using The Steam Mop
One thing to keep in mind is that, due to the delicate nature of laminate, it is recommended to steam mop on a less frequent basis than other types of flooring.
Steam heat is not something that should be used on laminate on a regular basis, so keep your steam mopping for times when you feel they need a fast shine and sanitization.
It’s a wonderful method to get a fast shine out of your laminate flooring if used properly.
The Best Steam Mops for Laminate Floors
Choosing a steam mop for laminate flooring is not as simple as it may appear. However, if you know what to search for, you may discover a good mop fast. I discovered the finest steam mops for laminate flooring after consulting with professionals and examining consumer comments.
A lightweight steam mop is an excellent complement to any comprehensive cleaning routine. This mop is lightweight and compact, allowing it to fit neatly between furniture and when stored.
It has clever features, such as swivel steering, that make cleaning a snap. Simply push the trigger to release the steam; when you do, the steam stops instantaneously.
This mop is suitable for use on any type of flooring. The smooth pad glides softly across the floor, making it ideal for laminate flooring.
Because of the super-fast heating, you’ll be ready to clean in no time. Without the use of chemicals, the strong steam cuts through grease, grime, and stubborn stains.
The extra-fast heating time means you’ll be ready to clean in 20 to 30 seconds. Simply fill the tank with water and plug the mop into an outlet.
With this steam mop, you won’t have to worry about water damage. It leaves no standing water and dries the floor in 30 seconds.
I almost never have the same sort of flooring throughout the house. As a result, needing a single tool to clean different types of floors is convenient. The Light ‘N’ Easy steam mop, thankfully, can be used on laminate, hardwood, ceramic, marble, and linoleum floors.
You may get a carpet glider if you have carpets or rugs in your house. This allows you to do more cleaning tasks in a single session.
Greasy splotches on the floor beside the stove? Gone in an instant. Simply push the trigger to unleash the steam and let go to give the pad a nice wipe.
The reservoir can’t store much water, which was an issue for some users. It was inconvenient for them to have to stop, refill and reheat while cleaning.
I recommend the Bissell PowerFresh for a blast of fresh smell in your house. It comes with two washable pads that clean thoroughly.
Because of the swivel steering, the mop is simple to move around furniture. Because to the small floorhead, you can also reach behind low cabinets and furniture.
Remove the floorhead and use the SpotBoost Brush to treat spots or persistent stains. It’s also great for cleaning grout.
Using the provided measuring cup, you can simply fill the tank. With the 25-foot power cord, you can also roam about freely.
Steam mops are popular among homeowners because they are effective at sanitizing. The Bissell PowerFresh promises to eliminate 99.9% of germs without the use of chemicals. To me, that seems like a victory!
There is also an accessories package with two specific, washable pads included. One is a soft pad, while the other is a scrubby pad that is great for stubborn dirt and stains. You also receive two Spring Breeze Smell discs, which you place in the steamer’s tray to emit a pleasant scent while you clean.
When you’re ready to go, simply fill up the tank with the measuring cup. Plugin the steamer and wait 30 seconds for it to heat up.
Bissell sells Scent Waters, which may be added to the tank. It’s demineralized water, so there won’t be any buildup or blockages in the machine.
You may also fill it with tap water, although distilled water is preferable to minimize mineral accumulation.
Detach the floorhead and use the SpotBoost Brush to clean up tiny, sticky messes. It features tiny bristles that, when combined with hot steam, effectively cut through filth and grime.
Unfortunately, the tank on this model is not detachable, as several buyers pointed out. Filling the tank needing the measuring cup is simple, but emptying it is a different issue. Customers have reported having to raise the entire gadget over the sink in order for it to drain.
If you want a steam mop that can do more than just clean your laminate, this is the one. This Light ‘N’ Easy mop comes with three different types of steam tools, allowing you to clean every part of your home.
It glides across the floor effortlessly and may even be used on carpets. You don’t have to push a button to release the steam; merely tilt it as you walk and it will start steaming.
When used as a portable, a Smart Sensor point recognizes when you need it to steam. It warms up rapidly and has three temperature settings to fit the work at hand.
Tilt the steamer as you move it around the floor to emit steam as you clean. When you place it upright, it will come to a halt.
Customers have reported issues with other steam mops that did not cease steaming when upright. There have been several reports of damaged finishes and flooring. This function, on the other hand, will ensure the safety of your laminate floors.
The portable steamer disappointed a few consumers. They thought it wasn’t as successful as they had hoped.
Using Steam Mop On Laminate Flooring
Many first-time steam mop users comment on how amazed they Are with the results.
Steam mops are great for getting a deep clean without hurting your back or bank. The steam’s high-temperature blasts away filth, grime, stains, and germs.
On laminate flooring, though, you should use caution. Laminate floors are long-lasting and stain-resistant. However, they are not as resistant to moisture as other types of flooring, such as vinyl. As a result, the high temperature that makes your surface sparkle may also cause significant harm if not handled appropriately.
To protect your flooring, avoid overheating the steam mop and use it on a low level.
More Mopping Tips
- How To Clean Stained Linoleum Floor
- Cleaning Hacks To Remove Dog Urine Stains From Concrete
- Best Mopping Techniques For Any Floor
- How to Use a Steam Mop
- Is a Steam Mop Better Than a Regular Mop?
- You Asked: Can I Use a Steam Mop on Laminate Floors?
- The Best Baby Safe Floor Cleaner (Safe For Pets Too)
- How To Clean A Steam Mop Properly
Check out the planner!
You can also grab a copy of my cleaning planner, “The Get It Clean Cleaning Planner here on the site. It’s packed full of extremely practical tips and tricks and checklists that can help you get your house clean, and keep it clean once and for all.
Also, be sure to smash those share buttons below!