Using these easy procedures, you can keep your tile floors looking gleaming and fresh.
Ceramic tile is difficult to surpass in terms of beauty, flexibility, and durability. Ceramic tile is ideal for bathroom, kitchen, and even entryway floors, as well as backsplashes and counters. It is typically easy to care for, although it does necessitate some maintenance. Follow these cleaning tips for ceramic tile and you’ll keep it in pristine condition for years to come.
This post may contain affiliate links. Full disclosure here.
How To Clean Ceramic Tile Floors
Deal With Scratches
Ceramic tile, a moderately durable substance made of natural clay, sand, and water and fired in a kiln, may be scratched.
Sweeping or vacuuming on a regular basis (with a soft head attachment) will avoid dirt and debris from marring the surface and becoming ground into the grout.
If your doorway has ceramic flooring, lay a doormat both outside and inside and urge family members to wash their feet.
Wash Tiles Often
After sweeping or vacuuming, mop ceramic tile floors with a little quantity of mild dish detergent mixed in hot water at least once a week. There should be no need to use harsher cleaners, but if you must, test your selected cleaner on an inconspicuous area (such as behind an appliance) to verify it will not ruin the finish.
Avoid using a sponge mop since it will push dirt off the tiles and into the grout. Instead, use a string or strip mop head. Replace unclean water as quickly as possible to avoid dull, hazy effects.
Dry It Off
Ceramic tile may be slippery when wet, so either fully dry the surface with a clean towel or remain out of the room until it completely dries to avoid slipping.
Everyday messes, such as spilt milk and tracked dirt, should be cleaned up as quickly as possible, otherwise the tiles may discolour. Simply wet a towel or mop with warm water and a small amount of mild dish detergent before wiping it up.
Grout is used to seal tiles, keep water out, and give them a polished look. However, grout is a porous material that is generally white or light in colour, making it prone to becoming dirty. Sealing the grout after tile installation and once or twice a year after that is a preventative step. At your local hardware or home improvement store, you may find a variety of easy-to-apply grout sealers.
TIP: Consider using darker grout when laying new tile. It not only hides filth, but the contrast adds an appealing modern aesthetic.
Keep Grout Clean
If the grout does need to be cleaned, vigorous scrubbing with a sharp brush and hot water will usually be enough. More difficult jobs necessitate the use of a vinegar/baking soda paste or a hydrogen peroxide solution: Allow several minutes to pass before cleaning with the brush and rinsing. Stains that are very difficult to remove may necessitate the use of bleach or even steam cleaning.
Once the grout has been cleaned, a frequent spritz with a vinegar-and-water solution will assist to prevent new stains from forming.
Best Mops for Ceramic Tile
It is preferable to use a spin, rag, or chamois mop while cleaning ceramic tile.
If at all possible, avoid using a sponge mop. This causes debris to accumulate in the grout, giving it a drab look.
Rubber mops leave dirt in the grout as well. As a result, they aren’t a good choice for this sort of flooring.
Ceramic tile may also be cleaned using a cloth. A towel, on the other hand, is not suitable for flooring since it requires cleaning on your hands and knees. A rag mop works the same as a towel on floors, except it saves your knees. A towel is the best technique to clean ceramic tile in a shower.
Cleaning Product Considerations For Tile Floors
According to TCNA, if you want to use a professional cleaning agent on your ceramic tile, use one that is alkaline rather than acidic. Acidic cleansers, such as Pine-Sol, may damage and break down the grout. As a result, alkaline cleansers, such as Mr. Clean floor cleaner, are ideal for this sort of flooring. (Note: Acidic products may be used to remove rust or calcium deposits.)