How To Clean a Dry Erase Board

Sharing is caring!

Whiteboards have mostly supplanted blackboards in many schools, and they are also widely used in companies and homes.

While they are an excellent tool for scribbling down thoughts or presenting information to a group, they do have a tendency to become soiled with frequent usage.

Cleaning your dry erase board on a regular basis can keep it in good condition for many years. However, if it does become soiled, there are techniques to restore its original appearance.

Continue reading for four easy methods to clean a whiteboard.

This post may contain affiliate links. Full disclosure here.

How To Clean A Dry Erase Board

Before Cleaning

Before you start cleaning your whiteboard, figure out what it’s composed of. Melamine, porcelain, or glass are the most common materials used to make dry erase boards. Melamine is used to make the cheapest and widely accessible dry erase boards. Cleaning techniques for all three materials are comparable, although some chemical solutions may be harmful to melamine whiteboards, which can be porus.

Clean Off Old Marks With New Marker

Have you ever written on a dry erase board with a permanent pen by accident? If this is the case, don’t be alarmed; it doesn’t imply your whiteboard is doomed. Simply take a new dry erase marker and draw over the discolored spot.

Allow it to dry before erasing the fresh markings needing a whiteboard eraser. The previous stains should be removed as well. If the stains remain, repeat the procedure for the best results. This method can also be used to remove marks from dry erase markers that have discolored the board.

However, keep in mind that melamine boards are especially prone to persistent staining and ghosting and may not react to this approach.

Use A Soft Cloth And A Cleaning Solution

After you’ve eliminated any obvious stains, it’s time to thoroughly clean the entire board. While a particularly designed whiteboard cleaner, such as Expo Whiteboard Cleaner (available on Amazon), may be used, there are a variety of home items that you may already have in a drawer or closet that can do the job. Rubbing alcohol, hand sanitizer, acetone-containing nail polish remover, vinegar, and Windex are all safe to use on a whiteboard.

To clean the whiteboard, dampen a towel and rub it with your preferred cleaning solution. Rinse the cloth with cold water and use it to remove any leftover cleaning solution.

Maintain A Clean Board

The easiest way to maintain your whiteboard clean is to erase any markings after you’ve finished needing it. To minimize ghosting, always wait until the marks have completely dried before erasing them, but keep in mind that markings that remain on the board for more than a day or two are more likely to leave stains behind.

This is especially true for melamine dry erase boards. Simply use a felt whiteboard eraser for daily cleaning. A wet towel will suffice for a more thorough frequent cleaning. To dry the board, use a clean, dry cloth.

Avoid Abrasive Cleaners

Tiny particles in abrasive cleaners such as toothpaste, Comet, and baking soda can damage the surface of a dry erase board. Avoid needing abrasive cleaners and wax-based solutions, which may leave a thin coating on the surface of the whiteboard. Similarly, don’t wipe a whiteboard with your bare hands since your skin’s oils might permeate the surface and create harm over time.

Household Products You Can Use

  • Hand sanitizer
  • Rubbing alcohol
  • Non-acetone nail polish remover
  • Peroxide
  • Hairspray
  • Vinegar
  • WD-40

Using any of the liquid solvents listed above, follow these steps:

  1. pour a tiny amount of liquid onto a soft cloth or sponge.
  2. Wipe the whole surface of the board with merely water a second time.
  3. The board should be fully dry.
  4. If required, repeat the procedure.

Removing Permanent Marker From A Whiteboard

If you discover a permanent marker was used on a whiteboard, don’t worry; even a permanent marker can be erased. Due to the non-polar solvent in dry erase markers, tracing the permanent marker content with a dry erase marker and erasing it will result in a clean slate. Any of the cleaners described above may also include organic solvents such as 2-butoxyethanol, which can aid in the removal of permanent pigment.

How To Clean a Dry Erase Board Bottom Line

Keeping a whiteboard clean may appear to be a simple chore, but frequent care is required to preserve its durability. Following these four procedures will allow you to maintain your dry erase board looking new for years to come.

Need More Cleaning Hacks?

Sharing is caring!

Check out the planner!

You can also grab a copy of my cleaning planner, The Get It Clean Cleaning Planner here on the site. It’s packed full of extremely practical tips and tricks and checklists that can help you get your house clean, and keep it clean once and for all.

Also, be sure to smash those share buttons below!

Similar Posts