Hacks to Get Rid of Mold Smell

Hacks to Get Rid of Mold Smell

Do you want to know how to get rid of the mold smell? This terrible odor is difficult to remove, and spraying an air freshener will only provide temporary relief. The trick is to seek the mold colony once you’ve detected the stench.

Although spores aren’t responsible for the foul odor, they ly arrive in a group. Spores move through the air and may get up in your lungs. As a result, eliminating the mold odor is not only important for fragrance purposes but also to keep you and your family healthy.

Mold removal is not as straightforward as a typical cleaning session; certain measures need to be taken.

This post may contain affiliate links. Full disclosure here.

What Is the Source of the Mold Smell?

Spores are mold seeds that are responsible for the mold’s growth and reproduction. Although spores are frequently blamed for producing an unpleasant odor, they are not generally the source of the stench. Mold is present.

Mold generates microbial volatile organic compounds (MVOC), which are the underlying cause of a stinky house. Various MVOCs — and hence smells — are produced by bacteria throughout their growth, digesting, and reproduction.

Even if you have a plethora of mold removal products at your disposal, your mold removal approach may make or break your efforts. Cleaning procedures differ depending on the place or object you’re attempting to clean.

How To Remove Mold Smell From Clothes

If you find mold on your clothes, you may dry clean, hand wash, or use a washer. Although the drying process occurs last, it plays an important function.

Washing Machine

This might be the most convenient way to get rid of the fungi. Only wash contaminated items in the washing; you don’t want the spores to spread to clean clothes. Unless you’re cleaning fragile clothing, use the hottest setting.

Put your normal cleaning agent in the exterior receptacle within the drawer or straight inside the machine.

Fill the machine with water, and the detergent will naturally combine with the water.

Ingredients not listed: Stop the washing after your clothing is saturated and add the borax, vinegar, essential oils, or other things indicated above.

Washing: Run your washing machine for two full cycles.

Hand Washing

Hand washing can also be done before or after washing your items in the washing machine. If you simply need to clean one cloth or towel, a pail of hot water may sufficient.

Scrub: Using a brush with soft bristles, attempt to remove as much mold as you can.
Prepare the container as follows: Combine hot water, detergent, and any of the previously mentioned components.
Scrub the clothing gently to ensure that the mixture permeates deep into the fabric. Remember to put on gloves.
Soak for at least 20 minutes and up to several hours.

Dry Cleaning

Have you lately discovered mold on your clothing and are hesitant to touch it? Place it in a sealed plastic bag and pass it over to your dry cleaner.

Even if the moldy region isn’t visible, notify your dry cleaner about the fungal development. If you do not, other people’s clothing may become contaminated.

Drying Guidelines

Dry your clothes as soon as you finish washing them. Do not leave them in the washing or hand wash bucket overnight. Remove them immediately and dry them needing one of the techniques listed below:

Sunlight may destroy fungi, including mold. Ideally, you should hang your items outside in direct sunshine.
Dryer: If outdoor drying isn’t an option, put your items in the dryer.
If none of the above choices are available, hang your items in a well-ventilated place. To assist the fabric dry faster, a dehumidifier can be utilized.

Remove Mold Smell From Carpets

How To Remove Mold Smell From Carpets

Mold frequently seeks sanctuary in carpets. Dropping liquids or washing them without thoroughly drying them is enough to cause germs to thrive inside the fibers.

Cleaning Your Hands

To avoid discoloration, avoid needing borax, bleach, or chlorine-containing products.

  • Brush with vinegar: Using a soft brush, gently apply pure vinegar to the affected region. Ensure that the liquid reaches the carpet’s loIst layers.
  • Cover the carpeted area with a thin coating of baking soda to absorb moisture and eliminate odors. After a few hours, vacuum the powder away.

Commercial items can be used in place of vinegar. Just make sure you only use one formula.

Hang your carpet outside in the sun whenever feasible. If it’s linked to the floor, drying it will be crucial in getting rid of the mold and its odor. Here are some pointers:

  • Towel or cloth: Remove as much Itness as possible needing a dry towel or cloth.
  • Maintain enough ventilation in the room. Until the carpet is completely dry, use fans and open the windows.
  • If you have a humidifier, keep it nearby. It will soak up part of the moisture.
  • Hair dryer: Use a hairdryer’s hot air to speed up the drying process.

Making Use of a Steamer

You may have heard that you should avoid eating the transparent portion of moldy bread since the entire loaf is likely to be contaminated. Similarly, the presence of mold in some sections of the carpet indicates that the spores are likely prevalent everywhere.

As a result, the entire carpet needs to be treated. Depending on the surface, it may take longer and need more elbow grease than you anticipated.

Vacuum steamers are excellent mold-fighting equipment for big areas. Steamers typically heat water to temperatures ranging from 150 to 300 degrees Fahrenheit. The gadget will be more effective at destroying the fungi if the temperature is raised.

To improve the effectiveness of your vacuum, add two cups of vinegar or a normal carpet mold-killing solution to the clean water compartment.

Furthermore, the finest steamers will leave very little moisture behind. As a result, will not have to manually dry the carpet. This, of course, saves time and prevents germs from regrowing.

Cleaning Mold From Kitchen and Bathroom

Remove Mold Smell From Kitchen and Bathroom

Mold eradication in these areas is mostly accomplished by scrubbing. For more sensitive areas, use a sponge, cleaning tool, or a toothbrush to scrub.

Because these areas do not generally include porus material, bleach is also commonly utilized in bathrooms and kitchens. Sprays are easy to apply and can get into small crevices and gaps where mold may have collected.

Remove Mold Smell From Books

Have you ever come across an old novel with a needs toy odor and a few dark or white spots? Is the strong odor keeping you from reading it?

Mold may grow on any surface, even paper, as previously stated. If you enjoy reading, cleaning a book to remove odors without harming them will require some special attention.

To begin, you should eliminate any apparent mold. Gently step a toothbrush or soft brush over the cover and affected regions.

The book needs to first be dried before it can be entirely cleared of mold. Remove any moisture from the book, both inside and outside. Here are a few suggestions:

Place a sheet of wax paper between each page, or between the pages that retain the most moisture.

Ventilation: Keep your book in a well-ventilated space. Maintain it half-open, with contaminated sheets separated. More air will be able to circulate between the pages as a result of this.

Dehumidifier or fan: Place one of these devices near your book to help it dry faster.

After your book has dried, it’s time to get rid of the mold and its odor:

  • Tea tree oil: Place a few drops of tea tree oil on a towel and wipe down the book cover and all the exterior edges. Wipe the inside back and front covers with a damp cloth.
  • Proceed in the same manner as with the essential oil.

There is no formula for determining how much essential oil and alcohol to use. The trick is to prevent leaving any liquid or moisture on the book after cleaning it with the material.

Always test the essential oil and alcohol on a small patch of skin before needing it all over.

Get Rid of Mold Smell In Fridge

Remove the shelves, bins, crisper drawers, ice trays, and any other loose components and wash them with hot, soapy water in the sink. To get rid of lingering refrigerator odors, make a sanitizing solution of 1 tablespoon liquid chlorine bleach per gallon of water and wash down the bins and shelves; then rinse with plain water and air dry.

You’re now ready to clean the inside of the refrigerator. Our experts recommend a solution of 1 cup baking soda per gallon of water for this. Using a sponge soaked in the solution, clean the interior. Dip a moist sponge immediately in baking powder and apply elbow grease to remove caked-on food. Avoid needing abrasive cleaners and pads, since they might harm the interior of the refrigerator.

This is when patience comes into play. To achieve the greatest results, unplug the refrigerator, leave the door open, and let it air out for at least one day. If the odors in the refrigerator continue, clean it off with the baking soda solution again and let it air out for another day.

Tip: To add a nice odor, lay a few cotton balls soaked in vanilla inside the refrigerator and freezer and seal them for a few hours before refilling.

See Also: Everything You Need To Know About Cleaning And Organizing The Fridge

Get Rid Of Mold Smell In Car

Vacuum all inside surfaces, including the door panel, thoroughly before steaming. Use a tool that lets the detailer reach into gaps and crevices where odor-needing dirt, decomposing food, and tobacco ashes may be lurking. After all, odors can soon reemerge if all sources of odor are not removed.

Baking soda is another fantastic item that works well as a deodorizer. Baking soda is not only effective in removing smells, but it is also effective at removing stubborn stains and soap scum. Sprinkle it on the surface of the vehicle door, carpets, seats, or any other odor-causing surfaces in the cabin. Allow at least 15 minutes for the baking soda to dissolve.

Steam cleaning is the most effective and time-saving method for detailing all inside automobile surfaces and refreshing the air. One approach is to use a moderate commercial detergent comprised of natural ingredients in conjunction with steaming. Some automobile commercial cleaners even contain odor-eliminating chemicals, leaving the car cabin smelling fresher. As many of today’s clients choose green cleaning and deodorizing solutions, always use the mildest spray cleaner that will do the job.

Blot the area affected by an unpleasant odor with distilled white vinegar, a cheap yet effective odor neutralizer. Applying too much vinegar might result in that sour vinegary scent persisting for days or likes, especially if the car windows are closed. To avoid this problem, always dilute the vinegar with about 50% water and spray it on the region with the greatest stench.

Dirt and grime buildup can cause unpleasant odors to come from the engine. These odors can enter the cabin via vents. Cleaning the engine needing a steam cleaner, followed by a degreaser and a water rinse, reduces the likelihood of unpleasant odors landing on door panels and other interior surfaces.

Is Mold Smell Dangerome?

Mold spores are the ones that are causing many problems. These microscopic particles range in size from 3 to 40 microns – a human hair is no thicker than 150 microns. They circulate through the air and can be readily inhaled, potentially causing allergies, asthma, and other respiratory problems.

The intensity of the odor is frequently unrelated to how harmful the colony is to human health. Mold, for example, produces an enormous quantity of spores but very few MVOCs during its reproductive cycle. This indicates that the odor will be low, but there will be spores present and active.

What Does Mold Smell Like?

Mold is commonly thought of as a single form of fungi that develops on damp surfaces. In truth, over a thousand mold species have been found in only American houses.

Colonies can be found both indoors and outside. Mold might have been flourishing behind a wall or baseboard for months or years before you see and smell it.

Because mold cannot often be detected quickly, the stench it emits is ly the first indication. Do you remember the scent of a damp bathing suit left in a bag? This is just one of the intriguing odors that mold may generate.

Molds come in a variety of textures, colors, and smells. They do, however, have one thing in common when it comes to odor: it isn’t nice, to say the least.

Mold odors are commonly described as damp, sour, bitter, and musty. Some species generate natural fragrances, while others have a sweet, fermenting, or alcohol-like odor.

Let’s put another layer on top of it. Odors might differ even among the same species depending on their life cycle. Various gross smells can be produced during reproduction, growth, or even digestion.

Simply put, if your garbage is out, mold should be addressed when a persistent bad odor persists. Let’s just hope it doesn’t become a smell you’ve become accustomed to.

an I Get Rid of Mold Smells With Air Fresheners?

Can I Get Rid of Mold Smells With Air Fresheners?

When confronted with unpleasant scents, your initial instinct may be to cover them up. You could even believe you’ve fixed your smelly problem. However, the colony continues to spread, and the odor ultimately returns.

In addition, many air freshener producers contain chemicals that are harmful to human health. So, unless you use a natural solution, you may be breathing in more harmful chemicals than mold spores alone.

As a result, air fresheners are not advised for combating mold and its odor. These chemicals simply serve to conceal the pollution.

So, what’s your best bet? Because MVOCs and the associated odors are created by mold, the only long-term treatment is to eradicate the fungi colony.

The Best Mold-Removal Substances

These solutions will effectively eliminate mold from your house, whether you’re cleaning the bathroom, kitchen, carpet, or clothes. I’ve also picked a number of natural ingredients to eliminate the need for you to be exposed to harmful chemicals when eradicating mold.

Baking Soda and Vinegar

Another popular and natural mold-killing cleaning agent is vinegar.

Vinegar, which contains 5 to 20% acetic acid, is one of the most effective antifungal substances. It not only kills most bacteria but also eliminates smells. Baking soda is frequently added to vinegar to remove odors.

Do not combine vinegar with bleach as this might result in the formation of hazardous fumes.

Mold-Resistant Cleaning Spray

  • Combine the following ingredients: Combine one teaspoon baking soda and two tablespoons vinegar in a spray bottle. If desired, add half a teaspoon of dish soap.
  • Wait: Shake the bottle for a minute before proceeding.
  • pour in the water: Warm water should be added to the bottle.

Using Vinegar and Baking Soda to Clean

During the first washing cycle, pour one cup of white vinegar into the washing machine. Do not use any detergent.
Add half a cup of baking soda to the second washing cycle.

Hydrogen Peroxide

Many people keep hydrogen peroxide in their homes to treat wounds and injuries. However, it also has other beneficial qualities, such as mold-killing abilities.

Hydrogen peroxide is a low-cost but effective mold-removal solution. It’s also widely available at pharmacies and grocery shops in the health section.

It is particularly effective in cleaning porus surfaces because it acts as a bleaching agent. When compared to chlorine, it has the considerable benefit of not containing any hazardous components (water and oxygen).

Although hydrogen peroxide may be used on its own, it is most commonly mixed with baking soda. Baking soda is well-known for its ability to eliminate smells and reduce dampness. As a result, it is an excellent component to use in a natural mold-killing cleaning solution.

  • Combine water and 3% hydrogen peroxide in a spray bottle.
  • Wait and spray: Mist the area with water and soak it for 10 to 15 minutes.
  • Remove the mold needing a damp towel.
  • Swipe the affected area with a dry cloth to remove as much Itness as possible.

Add one cup to a load of laundry in the washing machine. Wait until the water has floId if your machine opens from the top. Use the tiny receptacle designated for other cleaning products if it opens from the front.

Because hydrogen peroxide lightens colors, avoid needing it on colored clothing.

Also, do not combine with vinegar, ammonia, or chlorine bleach, since hazardous fumes can be formed.


For thousands of years, people have utilized borax, a white mineral. It is commonly used to eliminate mold and fungi as well as to neutralize odors.

When borax is combined with water, it converts water molecules into hydrogen peroxide, which is now known to be a powerful mold killer. Borax is a versatile substance that may also be employed as an insecticide and herbicide.

However, because borax is difficult to dissolve and combine, it needs more preparation than other products.

  • pour four or five cups of warm water into a large mixing basin.
  • Borax: Add a half-teaspoon of borax.
  • Dissolve: Gently stir until completely dissolved.
  • This combination may be used as a hand wash, cleaning spray, or placed into your washing machine as is.

Hot Water

Using water hotter than 140 degrees Fahrenheit may be sufficient for a minor infestation on carpets or clothing. While hot water can destroy the fungi, a few drops of essential oils can boost efficiency while also leaving a pleasant smell. You may also make your own DIY air freshener at home.

Essential Oils

Essential oils are concentrated plant compounds that are sold in little vials. They are very adaptable and may be utilized for a variety of applications. There are oils for stress, headaches, inflammation, and other ailments.

A few essential oils have been investigated for their anti-fungal effects out of over 90 distinct essential oils. Furthermore, the volatile chemical components in many oils make them very fragrant, combating mold’s MVOC smells.

It is vital to select pure and natural essential oils. Synthetic goods may include hazardous, unnatural chemicals that are damaging to human health and the environment.

The research examined the effectiveness of five cleaning agents — ethanol, vinegar, and commercial products — in reducing fungi development. When applied as a liquid and vapor, tea tree essential oil had the best effects.

This implies that the oil may be sprayed directly on the moldy region. It may also be used to eliminate spores and odors by dispersing them in the air.

Clove essential oil has also been proven to be effective in the treatment of fungal infections. Other antifungal oils that remove mold and unpleasant odors include geranium, lemongrass, eucalyptus, and peppermint.


Surface mold and allergies may be removed needing only bleach. It is commonly used to clean hard surfaces such as tiles, countertops, and bathtubs.

However, bleach is ineffective for removing fungi from porus materials such as wood or drywall. Mold will regrow if spores remain deep within a fabric or substance.

Commercial Mold Cleaners

If you need a quick cleaning solution, “off the shelf” commercial solutions are effective. Most will not require any preparation; they are ready to be sprayed, put to your vacuum, or used straight on the carpet. Some of them contain the previously listed components, while others comprise chemical compounds.

However, keep in mind that 99.9% of the chemicals in these commercial cleaning solutions are not listed. You won’t always know exactly what you’re getting.

Their odor can also be quite strong. Wear a face mask if you are sensitive to chemical smells or compounds.

Precautions to Take Around Mold

There are a few measures you should take while dealing with the odor. These actions will assist to protect your lungs and keep spores at bay:

Wear a mask: To avoid inhaling mold spores, I recommend needing a mouth mask.

Eye protection: The fungi can cause eye discomfort and inflammation. Furthermore, the combination of mold and cleaning chemicals might cause enough pain to cause a cleaning session to be halted. As a result, it is critical to Wear protective eyeWear.

Gloves: Even natural substances, such as borax, can cause skin irritation. To avoid direct skin contact, wear rubber gloves.

Proper ventilation: Make sure the space is well ventilated by opening doors and windows.

Isolate the colony: As you clean, spores will inevitably fly about. As a result, always scrub one room at a time. It also helps to seal the door to keep the spores from spreading to other living areas.

Turn off HVAC systems: If you have a heating, air conditioning, or ventilation system, turn it off. It will keep the spores from escaping and seeking sanctuary inside your HVAC system, only to return.

When you’re through cleaning, put all of your equipment in a plastic bag and seal it. Immediately discard.

Hare A Professional To Deal With Mold Smell If

Mold odors might be more difficult to eradicate than I realize. When done incorrectly, the colonies might spread rather than be eradicated. Here are a few examples of when it’s important to seek expert assistance:

If you can smell the mold but can’t identify the source, you don’t have a visual.

Mold in a medium-sized area: If mold has spread to an area larger than 10 to 30 square feet, a professional should examine the problem and provide recommendations.

Large molded area: If the mold spans more than 30 square feet, the work should be handled by a qualified individual. You might also want to look at the insulation issue.

Mold keeps regrowing: There might be hidden spores that keep the colony alive.

Get Mold Smells Out FAQ’s

Hacks to Get Rid of Mold Smell Bottom Line

Mold odor is pungent and rotten, and it can emerge unexpectedly anyplace within or outside the home. Although it’s unpleasant, the odor isn’t hazardous; it’s the spores that are.

Getting rid of mold odors requires eliminating the colony, and air fresheners are just a temporary fix.

Fortunately, there are several medicines available to assist you in “fighting the fight.” Options range from hydrogen peroxide, vinegar, baking soda, borax, bleach, and essential oils to commercial goods.

It may take some preparation, effort, and sweat, but your home will soon smell like spring.

ks to Get Rid of Mold Smell Bottom Line

Similar Posts