Follow these steps to ensure squeaky-clean results every time you mop, and say goodbye to floors that seem dirty even after you’ve cleaned them.

You’ve just picked up a mop to clean up a spill or wipe away the day’s grime, but will utilize this cleaning equipment actually make your floors dirtier? If no matter how much you clean, you still have dingy flooring, you may be violating the first guideline of mopping: Vacuum first, then mop. Mopping a floor coated with dust, grime, and hair without a good sweep or vacuum job just distributes the particles about. If you’ve been making this error your entire life, there may be a number of additional areas in your cleaning regimen that may be improved. So, once you’ve successfully implemented the first step, try incorporating the equally important components that follow, and your floor will be so clean you could eat off of it.

This post may contain affiliate links. Full disclosure here.

Before you Mop, You Must Find The Best Cleaner

It’s a widespread misunderstanding that using more soap would result in cleaner floors. In actuality, applying too many suds leaves a sticky residue behind, which can trap extra filth. Whether you choose a homemade or commercial cleaner, select one that is appropriate for your floor type and use it sparingly.

Best Cleaners For Hardwood Floors

Check to see whether your hardwood floors have been treated with polyurethane or wax. If your floors are polyurethane-sealed, use a moderate or pH-neutral soap with water. Avoid cleaning chemicals with acidic components (natural or commercial), which can harm wood over time. If your floors are waxed, just mop them once a week with a wet (nearly dry) mop—even a tiny quantity of water might cause warping.

Best Cleaner For Laminate Floors

When it comes to water, like with hardwoods, less is more; you want to protect it from seeping beneath the laminate boards. Use wet mopping and spot cleaning instead of professional floor cleaners with polish.

Best Cleaner For Vinyl Floors

A solution of apple cider vinegar and water is one of the best cleaners for this floor surface. Because of its acidity, vinegar removes filth without leaving a buildup and disinfects at the same time.

Best Cleaner For Linoleum Floors

Because it is not as durable as vinyl, this floor surface needs a gentler cleanser. In a spray bottle, combine a few drops of dish soap and hot water, and then spritz the surface section by section. Finish by sweeping the floor with a wet mop and clean water.

Best Cleaner for Stone Tile Floors

Using a pH-neutral, non-chelating cleanser that will not react with the minerals in the stone, mop the floor. Bleach, ammonia, and vinegar should be avoided since even little amounts can harm the seal on stone tile flooring.

Best Cleaner For Ceramic Tile Floors

White vinegar and water combine to provide an efficient, odour-eliminating, non-toxic cleaner for this floor surface—ideal for pet and child-friendly houses.

Use the Right Mop

Most people see a string mop, sometimes known as a “yacht mop,” when they think of a mop. However, depending on the type of flooring, a sponge mop is worth considering. When deciding between the two, bear in mind that string mops collect a lot of water and require multiple rounds of wringing, whereas a sponge mop contains a lot less water and is perfect for hardwood and laminate flooring.

Once you’ve decided on a mop type, submerge it in your cleaning solution all the way to the top of the head. Allow the mop to absorb the cleaner before wringing off as much moisture as possible. Remember that you want the mop to be moist, not wet. In certain situations, such as with hardwood floors, laminates, and linoleum, the mop must be wrung out many times until nearly dry.

Figure Out Your Bucket Situation

Here’s a sanitary tip: use one bucket for rinsing and another for cleaning. You may wring out the water from the soiled mop without contaminating the detergent bucket with whatever debris was picked up by dipping it into a separate rinse bucket. Replace the water in each bucket as it becomes filthy, but don’t just pour the previous batch down the kitchen sink. Because mop water contains germs and filth, flush it down the toilet rather than using the same receptacle to rinse off your chicken and veggies during tonight’s supper prep.

Mop In A Paint Pattern

To avoid walking in the area you just cleaned, start mopping in one corner of the room and work your way back toward an exit, just as you would if you were painting the floor. Pay attention to the pattern in which you push your mop as well. Swipe in the direction of the wood grain on hardwood floors; on textured floors, wipe in tiny figure eights. If you come across any stubborn areas that won’t come clean, go over them again with cleaner and a towel after you’ve done a thorough pass over the floor.

Don’t Forget To Disinfect and Air

To ensure a germ-free mop the next time you clean, soak your mop head in a combination of bleach and water after a hard day’s work. Wait 10 minutes before rinsing and wringing off any extra water. Never leave your mop in the bucket to dry, as this can lead to the growth of germs and mould in the remaining wetness. Squeezing out every last drop should make your cleaning process easier and cleaner the next time you bring out the mop.

Mopping Techniques FAQ

Related Posts